HARDWARE CONTENTS (shown actual size)
AA
Touch up pen
Qty. 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• Keep small parts away from children.
• Installing the item will require more than one person.
CAUTION
• DO NOT try to pry off top from vanity. Damage to top or vanity may occur.
•Use care when assembling the vanity; take your time and follow the assembly instructions closely.
BB
Optional Gold Knobs
Qty. 7
4
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 20-30 minutes
Tools Required for Assembly (not included): Silicone compound, Utility knife, Phillips Screwdriver
ASSEMBLY INSTRUCTIONS
1. Adjusting the doors
If the doors preassembled to vanity (A) require
adjustment, follow the below options as needed: To
adjust door up or down, loosen screws (a), adjust
door and retighten screws. To adjust door left and
right, turn screw (b) in or out. To adjust door in and
out, loosen screw (c), adjust door and retighten
screws.
2. Adjusting the leg levelers
In case of uneven floors, floor levelers are provided
at the bottom of the vanity. If necessary, adjust floor
leveler by hand to correct tilting and/or level doors.
1
A
2
5