neno Tocco Manual Del Usuario página 10

03. CLEANING AND MAINTENANCE
1. NOTE: The use of water other than distilled water causes scale and sediment
accumulation and shortens the life of the appliance. The manufacturer
recommends the use of distilled water.
2. Disconnect the plug from the socket and wait for the unit to cool down
before cleaning.
3. Be careful not to damage the heating surface with sharp metal tools.
4. In case of limescale accumulation, mix 10g of citric acid with 200ml of cold
water and boil using the sterilisation function, then wait 2-3 minutes after
the sterilisation is complete.
5. Cleaning: remove the top cover from the body and wipe the surface of the
unit with a damp, soft cloth.
6. It is recommended to clean the unit every 10 -15 days, or more often if the
water used causes limescale accumulation.
7. Set the unit aside to dry after cleaning. Do not immerse the body in water
for cleaning.
8. It is recommended to pour a mixture of citric acid and vinegar over the
vessel every month and leave it for 10 minutes, then rinse it under running
water.
04. DISPLAY AND OPERATING PANEL
SEE FIG. B
1. Temperature indicators
2. Select temperature
3. DIY-mode - heat up milk / food / keep warm / sterilise
4. Heated liquid time/capacity indicator
5. Reduce/increase temperature
6. Bottle/container material indicators
7. Select material
8. Select capacity
9. Quick heat-up mode
10. Power supply
11. Nightlight
05. OPERATION OF THE DEVICE
1. When the plug is inserted into the socket, the device will automatically go
to sleep.
2. Press the power button to switch the device on or off.
3. Press the "DIY" button to use the milk/ food warming/ temperature
maintenance/ sterilisation function or the "FAST" button to use the rapid
warming function.
10