Nave EMMI 5310716 Manual Del Usuario página 6

Explanation of functions
Charging process
Overheating/exploding due to incorrect handling of the load
▪
Make sure that the charging current of the connected power supply does not exceed a maximum of 1 A. A
higher charging current of the product to be charged can cause a defect or fire.
▪
Overloading of the product should be avoided as it can cause overheating.
▪
Be careful not to use the product near flammable materials or highly flammable substances.
▪
During charging, the product should always be supervised.
Non-compliance with these instructions will result in serious or fatal injury.
Cleaning and care
Damage to the product
▪
Do not use any solvents for cleaning.
▪
Do not apply pressure to the solar module during cleaning.
Non-compliance with this instruction can cause damage to property.
▪
Use a soft, dry cloth for cleaning.
▪
In case of severe soiling, use a soft and slightly damp cloth to clean the product.
53107xx_Manual_17066_05_V1.docx
Contact sensor
▪
Reacts by touching a finger
CCT
▪
Warm white, neutral white, cool white
DANGER
The luminaire is charged using a USB-C cable, which is also supplied.
The luminaire can be used during the charging process.
▪
A red operating light switches on during the charging process.
▪
When charging is complete, the red indicator light goes out.
NOTE
6 / 28