Zendure Hub 2000 Manual Del Usuario página 10

EN
Operation Guidelines:
Item
Power outage
start IoT Connection
IoT Connecting
Finishing IoT Connection
Hub 2000
Reset IoT Connection
Turn off IoT
Turn on IoT
overvoltage reminding
/ overcurrent reminding /
short circuit reminding /
error reminding
AB1000 or AB2000
connection
AB1000 or AB2000 or
SuperBase V or Satellite
Battery recharging
AB1000 or AB2000 or
SuperBase V or Satellite
Battery battery left
capacity
AB1000or
AB2000 or
SuperBase
V or Satellite
Battery
low power reminding
Low temperature
warning
high temperature
warning
overvoltage reminding
/ overcurrent reminding /
short circuit reminding /
error reminding
8
Item
Connect PV or AB1000 or AB2000
Power ups or SuperBase V or Satellite
Battery
Disonnect PV or AB1000 or
AB2000 or SuperBase V or
Satellite Battery.
After Hub 2000 Power ups
After Hub 2000 power ups
/
Press and hold IoT button for 3
seconds
Press and hold the IoT button 1
seconds
Press and hold the IoT button 1
seconds
Please stop using immediately,
check the detailed error
information in Zendure APP, and
contact customer service
After Hub 2000 Power ups
Display on Zendure
App,Download the Zendure App
and bind Solar Flow. SuperBase
V and Satellite Batteries will also
appear on the Display.
Display on Zendure
App,Download the Zendure App
and bind Solar Flow
Waiting the temperature is
normal before using
Please stop using immediately,
check the detailed error
information in Zendure APP, and
contact customer service
How To
IoT indicator flashes green slowly
IoT indicators flashes green
IoT indicator lits green
IoT indicators flashes green
IoT indicators not be lit
IoT indicators flashes green
Hub 2000 Indicator flashes red
AB1000 or AB2000 indicator
flashes green for 2s and then
stays lit green
1) AB1000 or AB2000 Indicator
flashes green.
2) SuperBase V will display Input
/
Power on the Screen.
3) Satellite Battery's Power Button
will flash.
AB1000 or AB2000: Indicator will
turn red.
SuperBase V or Satellite Battery:
Power Ring or Power Indicator will
flash for 30 seconds when the
State of Charge (SOC) is low (10%
to 20%). Additionally, it will beep 5
times when the SOC drops to 5%.
1) AB1000 or AB2000 indicator
lit red . 2）SuperBase V or
Satellite Battery: Low- or High-
Temperature Warning flashes on
the screen.
AB1000 or AB2000: Indicator will
turn red.
SuperBase V: Battery Failure and
Error Code flashes on Display.
Satellite Battery: Status Indicator
will turn on.
LED Indicator
Hub 2000 indicator lits green
All indicators not be lit
/