Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time:
Additional time to install hangers on porch or structure modifications.
Tools Required for Assembly (not included): Allen
ASSEMBLY INSTRUCTIONS
1.
BUILD THE LOWER STRUCTURE
Connect the Long-Side Header Beam (B1) to Right Rear Leg (A3) and Left
Rear Leg (A2) using
Bolts (CC). Next connect Short-Side Header Beams (B2)
using Bolts (CC). Attach Right Front Leg (A1) and Left Front Leg (A3) to the
other ends of the Short-Side Header Beams (B2) using Bolts (CC). Finish by
connecting the Long-Side Header Beam (B1) to Left Front Leg (A3) and Right
Front Leg (A1) using Bolts (CC).
Hardware Used
CC
AA
AA
M6 x 15mm Bolts
AA
AA
FF
AA
Allen Wrench
AA
2. ADD HOOKS TO BOTTOM OF TABLE
Connect the three (3) Accessory Hook Racks (F) to the underside of
the Shelf Assembly (D) using Phillips Head Screws (DD).
Hardware Used
ST4.8 x 10 mm
DD
Philips Head Screws
Philips Head Screwdriver
EE
1 Hour
wrench and Phillips head screwdriver.
x 16
x 6
6
1
2
x 1
Publicidad
