LF Stryle SELECTIONS GFS20317S Instrucciones De Montaje página 7

ASSEMBLY INSTRUCTIONS
3. INSTALL SHELF ASSEMBLY
Install the Shelf Assembly (D) onto Right Front Leg (A1) and Right Rear
Leg (A2) by inserting the holed tabs into the brackets, then fasten using
Bolts (CC). Repeat with other side.
Hardware Used
AA M6 x 15mm Bolts
CC
AA FF
AA Allen Wrench
AA
4. ROOF ASSEMBLY
Install Hanger Hook (AA) into the underside of Rafter Hub (E). Then insert
the ends of Long Corner Rafters (C1) into the Rafter Hub (E) as shown.
The silver push buttons on parts C1 should make an audible click and
protrude from the holes of the Rafter Hub (E) when securely connected.
Hardware Used
AA
Hanger Hook
ADD LOWER CANOPY AND UPPER RAFTERS
5.
Drape the lower canopy over the assembled roof frame, aligning the short
and long sides. Then connect the Short Corner Rafters (C2) to the Long
Corner Rafters (C1) as shown. The silver push buttons on parts C2 should
make an audible click and protrude from the holes on parts C1 when
securely connected.
3
x 4
4
x 1
5
7