Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
6.
INSTALL UPPER CANOPY
Install the Upper Canopy (G1) to the Short Corner Rafters (C2) as shown.
7.
INSTALL ROOF ASSEMBLY
With two people, lift the roof assembly on top of the frame assembly
and join them by inserting the post at each Long Corner Rafter (C1)
into the receiving posts on the top of each Leg (A1, A2, & A3 x 2).
The silver push buttons on parts C1 should make an audible click
and protrude from the holes on the receiving posts when securely
connected.
8.
FINA L ASSEMBLY
Finish installing the Lower Canopy (G2) by pulling down and out on the
D-loops at each corner and inserting the ends of the Long Corner Raf ters into the
fabric pockets on the Lower Canopy. For the easiest assembly it is recommended to
start with the Right Front Leg (A1), then move to Left Rear Leg (A2), then Left Front
Leg (A3), and finish with Right Rear Leg (A3). If installing on the ground, insert
Ground Stake (GG) through one hole on each Leg (A1, A2 & A3). Be sure to use the
appropriate fasteners (not provided) to secure the Grill Gazebo if installing on a wood
or composite deck, or onto a concrete or paver patio. Your local store can help you
find
the appropriate fastener for your application.
Hardware Used
AA
assembly part
BB
AA
M6 x 15mm Bolts
CC
AA
FF
Allen Wrench
AA
AA
AA
Ground Stakes
GG
6
7
8
x 1
x 2
x 4
8
Publicidad
