Descargar Imprimir esta página

MPM MOP-50M Manual De Instrucciones página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
 Keep your children safe: do not leave any parts of the pack-
aging readily accessible (i.e. plastic bags, cardboard boxes,
polystyrene inserts, etc.).
 WARNING! Never let children play with plastic film
or bags. Choking/ asphyxiation hazard!
APPLIANCE DESCRIPTION
1.
Red caution lamp (power supply)
2.
Green caution lamp (thermostat)
3.
Upper cover
PRIOR TO THE FIRST USE:
ATTENTION! Before cleaning the heating plates make sure the appliance is unplugged!
1. Prior to the first use of the roaster, thoroughly wash the heating panels of the roaster with the
cloth moistened with warm water and thoroughly wipe with dry cloth thereafter.
2. Stand the appliance on a flat, stable and dry surface which is resistant to high temperatures.
3. Before toasting for the first time, the hot plates must be properly conditioned by running them
hot. Place the toaster on a firm, dry, level and smooth surface, plug the power cord to the mains.
Leave it running for 10 minutes. Next, unplug the toaster from the mains and wait until it cools
down completely. The hot plates may smoke slightly during this process. This is natural and will no
recur during further use.
NOTE! Bread may burn! Therefore the appliance must not be used near or below curtains and in
vicinity of other combustible materials!
NOTE! The working surfaces of the roaster are heated up to extremely high temperatures! Touch
the holders only!
USE OF THE ROASTER
NOTE! When opening the cover, proceed carefully owing to hot damp from the area under the
heating panels!
1. Oil the heating plates (5) with butter, margarine or other fat.
2. Insert the plug into the mains socket - the red (1) power and green (thermostat) indicator lights will
illuminate (2). Close the top cover of the appliance (3).
3. Prepare the sandwiches.
4. When the appliance reaches the correct temperature, the green indicator light (2) - thermostat
- will go out. Open the top cover by pulling the latch (4), place the sandwiches gently on the hot-
plates. Close the lid gently and tighten the latch (4).
5. When checking the condition of sandwiches in course of their roasting, open the cover carefully
owing to hot damp escaping from the both sides of the roaster!
6. Open the cover and remove roasted sandwiches using wooden or plastic spatula.
7. Before preparation of the next sandwiches, always close the cover in order to maintain required
temperature. The green caution lamp (thermostat) will go on and off in course of roasting to indi-
cate that required temperature is maintained.
4.
Clip
5.
Heating panel
EN
17

Publicidad

loading