MPM MOP-50M Manual De Instrucciones página 18

Idiomas disponibles

8. After finished roasting pull out the plug from the plug socket and allow the appliance to cool com-

pletely.

NOTE! Do not use and metal and sharp knifes or forks, otherwise the damages of heating sur-

faces are possible!

CLEANING AND MAINTENANCE

1. Prior to commencing the cleaning (and after finishing the roasting), pull out the plug from the plug

socket and allow the appliance to cool completely.

2. Thoroughly wash the heating panels, clean the roaster edges using soft cloth or towel.

3. If complete removal of any food residuals from the surface of heating panels is problematic, pour

some edible onto dirty surface and try to clean after about 5 minutes. Your efforts will be success-

ful this time.

4. Wipe the external surface of the roaster using wet cloth.

ATTENTION! Do not immerse the appliance in water or any other liquids! Do not wipe the inside

of the appliance with acute, abrasive cloths or sponges, as this can damage the heating surfaces!

TECHNICAL DATA:

The technical parameters are given on the data plate of the product.

Power cord lenght: 0,7 m

NOTE! MPM agd S.A. reserves the right to introduce technical modifications!

Proper disposal of the product (waste electrical and electronic equipment)

Marking on the product indicates that after the service-life of the product expires, it should not be dis-

posed with other type of municipal waste. Used equipment may have a negative impact on the environ-

ment and health of people due to potentially containing hazardous substances, mixtures and components.

Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may

cause a release of substances that are hazardous to the environment and health. Used equipment should

be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the

electric waste collection points, the user should contact the municipal point of electric waste collection or used

equipment processing department.