Kathy Ireland Home CF605 Guía De Uso Y Mantenimiento página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
NOTE: The magnet is pre-attached on the canopy
bottom cover for you to remove and install easily.
□
Remove the magnetic canopy bottom cover (JJ) from the
canopy (C) by pulling it off.
□
Loosen the two canopy screws (SS) located in the bottom of
the slide-on mounting bracket (A).
□
Turn the slide-on mounting bracket (A) and lift it up to remove
the mounting bracket from the canopy (C).
2
Routing the wires
NOTE: The fan comes with 12 in. lead wires for use with
the provided 8 in. ball/downrod assembly (B). If you wish
to use a longer downrod use extension wire provided.
□
Route the wires exiting the top of the fan motor assembly (E)
through the decorative motor collar cover (D) and then the center
of the canopy bottom cover (JJ).
□
Make sure the opening of canopy (C) is on top and insert the ball/
downrod assembly (B) through the canopy (C).
□
Route the wires exiting the top of the fan motor assembly (E)
through the downrod as shown.
JJ
7
Please contact 1-888-757-7697 for further assistance.
A
SS
C
C
B
JJ
D
E