Operation
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Sport XL. If you have previously connected to another Bluetooth device, Sport
XL will reconnect. Press and release the Bluetooth button to disconnect the paired
Bluetooth device.
3. Press and release the Bluetooth button again to pair to a Bluetooth device.
4. Navigate to your Bluetooth device's setup screen, find "Sport XL" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
5. To disconnect the paired Bluetooth device, press the Bluetooth button.
6. To connect to another Bluetooth device, repeat steps 3-4.
Tip: If you would like to disable (or enable) the voice prompts, double press the Bluetooth
button.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange between devices, such as pairing, by
gently bumping them together. Check in your device's manual to see if this feature is
supported.
To use NFC to pair with Sport XL:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one time step).
3. Power on Sport XL.
4. Press and release the Bluetooth button on Sport XL and the Bluetooth icon will flash (only
needed for the first time when NFC pairing with the device).
5. Touch and briefly hold your device to the NFC logo.
6. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
7. To unpair, gently bump your device against the NFC logo located on Sport XL's top panel
or disconnect the Bluetooth connection from your device's Bluetooth menu.
7