Descargar Imprimir esta página

ION Sport XL iPA103A Guia De Inicio Rapido página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

Stereo-Linking Two Sport XL Speakers*
If you would like to play music from a Bluetooth device, you can first "link" two Sport XLs
together in order to listen to your music in stereo. One Sport XL will serve as the left speaker
and the other will serve as the right speaker.
To link two Sport XL speakers together:
1. Press and hold the Link button on both speakers to enter Stereo-Link mode. You will hear
a tone, and the word LINK will flash on each speaker's Display while they search for each
other. Once a link has been established, the word LINK will remain on the Display.
Note: The linking process can take up to a minute to complete. The closer the two
speakers are to each other, the quicker the link is established.
2. Press and release the Bluetooth button on either speaker to start the pairing process. The
Bluetooth icon will flash on the randomly assigned master speaker when in pairing mode.
The speaker assigned as master (with the Bluetooth icon illuminated) will play the Left
channel audio.
3. Navigate to your Bluetooth device's setup screen, find Sport XLs and connect. See
Pairing a Bluetooth Device
4. To disconnect two speakers or cancel linking between the two, double press the Link
button on either speaker.
*Sport XL may be able to link to different speakers in the ION Audio product line. For more
information, please visit ionaudio.com.
Using the Radio
Selecting a radio station:
1. Press the Radio button to select AM, FM1, or FM2.
2. Press either of the Tune/Track buttons to select a radio station. To "seek" (jump to the
next available station), hold either button down for a few seconds until it starts to seek a
station.
Saving a radio station as a preset:
1. Press the Radio button to select AM, FM1, or FM2.
2. Press either of the Tune/Track buttons to select a radio station.
3. Press and hold a numeric Preset button to assign the current station to that preset
number. The display will show "SAV" to show the station has been saved.
Recalling a saved radio station preset:
1. Press the Radio button to select AM, FM1, or FM2.
2. Press a numberic Preset button once lightly to go to the stored radio station.
8
for Bluetooth setup details.

Publicidad

loading