Vivanco EP 4S ALU Manual De Instrucciones página 5

ready for use
- The device is to be used on household power
outlets with voltage, power and frequency values
according to the specifications on the label of the
device.
- To prevent electric shocks, do not open the device.
- Professionals may only carry out repairs.
Installation and operation
Please connect the EP 4S ALU with the outlet socket
of your house /apartement. If it is planned to mount
the EP 4S ALU e.g. on a wallplease finish the
assembling first. Use the power on/off switch to get
power to the multi socket. The function – LED for
surge protection will start shining which shows the
correct functionof the multi socket. The EP 4S ALU
is now ready for use.
Note: If the multifunction LED for overvoltage
protection is not lit, the overvoltage protection is
defective and should no longer be used. In order
to ensure protection, the over-voltage protection
power strip must be replaced with a new one.
Technical Data
- 3,680 W (max.)
- 230 V/50 Hz
- Rated current: max. 16 A
- Overvoltage protection according to requirement
class SPD TYP3
Uoc = 3kV (für L-N, L/N-PE)
Up 1.8kV (für L-N, L/N-PE)
Hereby Vivanco GmbH declares that
EP 4S ALU is in conformity with the
fundamental requirements and other relevant
regulations of the directive 2004/108/EU.
Disposal of the device
This device shall not be disposed with
household waste. Please hand it over to any
collection point for electric devices in your
community or district. This ensures that old devices
are recycled professionally, economically and
prevents potential advert affects on the environ-
ment and human health.
Disposal of packing
Packing material shall be recycled.
Please do not dispose with household
waste and act according to local
disposal regulations.
Vivanco (UK) Ltd.
Luton Enterprise Park
Sundon Park Road
GB - Luton LU3 3GU
Tel.: (+44) 1582 578 740
Fax: (+44) 1582 578 741
consumer@vivanco.co.uk
Vivanco House
5