Tabla de contenido
Publicidad
STep 4:
(See Figure 4)
•
Attach the hitch bracket (7) to the hitch tube (5) using
two 5/16" x 1-1/4" hex bolts (13) and 5/16" nylock
nuts (15).
•
Assemble the hitch pin (9) to the hitch tube and hitch
bracket and secure it with the hair cotter pin (19).
STep 5:
(See Figure 5)
•
Insert the control tube (6) into the left hopper support
tube and secure it in place with the 5/16" x 3/4" lag
screw (57) and 5/16" lock washer (58).
•
Press tube plugs (25) into the right hopper support
tube and the control tube (6).
25
25
6
58
57
STep 6:
•
•
5
15
19
7
13
9
Figure 4
STep 7:
•
HinT: If the bolts spin when tightening, pull on the bolts
and turn them until they lock in place. Push in on the flow
control dial to help keep the bolts locked in place.
•
Figure 5
5
(See Figure 6)
Press the knob (22) onto the end of the flow control
lever (23).
Attach the flow control lever (23) to the control tube (6)
with a 1/4" x 1-1/2" hex bolt (12) and 1/4" lock nut (17).
Leave the lock nut loose enough that the lever can
pivot.
17
22
12
23
(See Figure 7)
Attach the flow control assembly (4) to the control
tube (6) using two 1/4" nylock nuts (16).
Insert the control cable into the hole in the control
lever (23).
Figure 6
16
Figure 7
Publicidad
Tabla de contenido
