Ambiano Z3050 Manual Del Usuario página 17

6. Press and hold the operating button
processor on. For best results, only keep the operating button pressed for a
very short time (within 1 second).
For a smoothly chopped result, you may need to scrape the sides of the
bowl down using a spatula. This should only be done after the food
processor has been switched off and unplugged.
If it is necessary to add food when the food processor is in use, release the
operating button to switch the food processor off, then add the ingredients
required, replace the lid and continue to mix.
Press and hold the operating button on the left side to use the reverse
mode. This will operate the blade counterclockwise and simply mix the
ingredients rather than chop. This also allows the food processor to knead
and mix ingredients that do not require the sharp edge of the chopping
blade.
7. When food processing is done, release the operating button to switch the
food processor off.
8. Unplug the power cord from the power socket.
9. Remove the lid and then the chopping blade or whipping disc.
10. Remove the bowl and empty the processed food.
11. Clean the main unit and all accessories after each use (see chapter
"Cleaning").
on the right side to switch the food
7
Operation
17