Publicidad
Idiomas disponibles
Idiomas disponibles
Determining the right location:
This appliance must be connected to the power supply via a
class II - IP 24 connection box pursuant to the rules of the NF
C 15-100 regulation.
Contact a qualified electrician.
- Important! Make sure that there is no electrical wiring or any other
installation (e.g. a water pipe) close to where the holes are to be
drilled. Make sure that the appliance is fixed vertically and firmly to
the wall.
- Choose screws and plugs that are suitable for the wall material and
the weight of the appliance.
- Respect the minimum distances between the appliance and walls,
floors, furniture etc.
Set-up and installing the appliance
Warning: Pay attention to the safety distance between the floor
and the appliance.
1. Choose a suitable
location for the towel
rail.
Rev 0_28 11 23
2. Fix the external support to a solid,
flat wall using suitable screws and
wall plugs according to the dimen-
sions shown in the installation diagram
above.
Made in China
Page 35
Publicidad
