Publicidad
Idiomas disponibles
Idiomas disponibles
Warning:
It is not necessary to disman-
tle the appliance to make the
connections (use the cable
that is already connected to
the appliance).
When installing the
appliance,
sure that the power
supply is disconnected.
Operating instructions
WARNING: there may be a slight odour on first use.
This will go away after a few minutes.
Ensure adequate ventilation.
Control panel
LCD display
On/
Standby
LCD screen
Rev 0_28 11 23
make
Select mode/Go back
Made in China
- Make the electric connection
with a flexible cable (2X1.0 mm²
or 2X0.75 mm² depending on
the model, from the H05 VVF
series).
- Connect the appliance to the
mains supply using a junction
box with minimum IP24 protec-
tion: brown wire (phase), blue or
grey wire (Neutral), black wire
(pilot wire).
Confirm/BST1/BST2 (boost mode)
Increase
Decrease
Page 37
Publicidad
