Publicidad
Idiomas disponibles
Idiomas disponibles
J
ASSEMBLY INSTRUCTIONS
1a. Find Bottom Panel (1).
1b. Attach the Feet (16) to the Bottom Panel (1) use a rubber
mallet. Then lift the legs in the direction of the arrow and
press to secure. Rotate and adjust to the desired height.
Hardware Used
16
Foot
2a. Find Back Panel (10).
2b. Match up "A" label on Back Panel (10) with "A" label on
Bottom Panel (1) and click together. Make sure the
connection is flush across the entire joint and there are no
gaps between the two panels.
*
Assembly Tip – Make sure edges are aligned before clicking
together.
** Assembly Tip – Be careful not to damage or scratch the
finished sides.
3a. Find Left Back Panel (8) and one Triangular Support A (11).
3b. Match up "B" label on Triangular Support A (11) with "B" label
on Left Back Panel (8) and click together. Make sure the
connection is flush across the entire joint and there are no
gaps between the two panels.
1
16
1
x 6
2
10
A
A
1
3
Click
11
B
B
8
4
ASSEMBLY INSTRUCTIONS
4a. Find Right Back Panel (9).
4b. Match up "C" label on Right Back Panel (9) with "C" label on
Back Panel (10) and match up "D" label on Right Back Panel
(9) with "D" label on Bottom Panel (1) simultaneously and
click together. Make sure there are no gaps among the three
panels.
4c. Match up "P" label on Left Back Panel (8) with "P" label on
Back Panel (10) and match up "Q" label on Left Back Panel
(8) with "Q" label on Bottom Panel (1) simultaneously and
click together. Make sure there are no gaps among the three
panels.
5a. Find Left Front Panel (2) and the other Triangular Support C (13).
5b. Match up "E" label on Triangular Support C (13) with "E" label on
Left Front Panel (2) and click together. Make sure there are no
gaps between the two panels.
Click
6a. Match up "F" label on Left Front Panel (2) with "F" label on
Bottom Panel (1) and click together. Make sure there are no
gaps among the three panels.
6b. Match up "G" label on Left Front Panel (2) with "G" label on
Triangular Support A (11) attached onto the Left Back Panel (8)
and click together. Make sure there are no gaps among the
three panels.
4
Click
P
C
P
8
10
Q
1
Q
Click
5
Click
13
E
E
2
6
Click
G
G
2
F
F
1
Click
5
C
9
D
D
Click
11
8
Publicidad
