Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
13a. Find Folding Door (4).
13b. Align the center of mounting holes on the hinge bases
pre-attached on the Folding Door (4) with the pilot holes on
Right Front Panel (3). Secure each hinge into place with four
15mm screws (20).
HOW TO ADJUST THE ADJUSTABLE HINGES ON DOORS
To adjust door in and out, loosen screw 1, adjust door
and tighten screws.
Adjust the door left or right by turning screw 2 clockwise or
counterclockwise.
To adjust door up or down, loosen screws 3, adjust door
and retighten screws.
Hardware Used
20
M4 x 15 mm Screw
14. Peel off the Silicone pad (18) from the stock card and affix
them onto the outer corners of each door where are in contact
with the Wood Braces (5 and 6).
Hardware Used
18
Silicone pad
Toe Kick Assembly Instructions
NOTE: Toe Kick need to be purchased separately.
15a. Install one Front Clasp (15) in front of each Foot (16) under the
front corners with a snap. Proceed to install the Toe Kick with
appropriate length and press down the clasp to secure the Toe
Kick into place.
Hardware Used
15
Toe Kick Front Clasp
13
1
3
2
3
x 8
14
5
x 6
18
15
x 2
16
15
8
DISASSEMBLY
20
4
6
1
4
4
RELEASE KEY
1. Insert the release key into the triangle hole.
2. The release key needs to be fully inserted.
3. You will need more than 1 for some panels.
4. It is important that release key in the sides
meet each other so that you are sure the
frame is fully unlocked.
2
3
5
6
9
Publicidad
