LaserLiner HD FlexCamera Manual Del Usuario página 5

Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. These documents must be kept in a safe place and passed
on together with the device.
Intended use
The HD FlexCamera is a camera unit for connection to the base VideoFlex HD unit. When combined with
the base unit, colour video images are sent to the LCD for inspecting highly inaccessible locations such
as cavities, shafts, masonry or in vehicles.
General safety instructions
– The device must only be used in accordance with its intended purpose and within the scope
of the specifications.
– This product and its accessories are not toys. Keep out of reach of children.
– The camera head can heat up considerably during use and lead to damage to sensitive inspection objects.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures or significant vibration.
– The device must no longer be used if one or more of its functions fails, or if the housing or connecting
cables are damaged or the battery charge in the base unit is low.
– The camera head is not acid-resistant or fireproof.
– It is absolutely vital to ensure that the HD FlexCamera does not come into contact with chemicals,
voltage, moving or hot objects. This can damage the device and put its user at risk of serious injury.
– To preserve the IP 68 rating, the camera cable may only be immersed up to a distance of 10 cm from
the housing of the base unit.
– The HD FlexCamera must not be used for medical examinations / examining people.
– Please ensure compliance with the safety regulations set out by local and national authorities with
regard to the correct and proper use of the device.
– The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
Safety instructions
Using artificial, optical emission (OStrV)
LED outlet
– The device works with LEDs of risk group RG 0 (exempt, no risk) in accordance with the latest versions of
applicable standards relating to photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– When used for the intended purpose and under reasonably foreseeable conditions, the accessible radiation
of the LEDs is safe for the human eye and skin.
HD FlexCamera
05
EN