GE AFHC09AM Manual Del Propietário página 3

About the controls on the air purifier, ge.com
Power0n/0ff Filterreset
indicator Fanspeedindicators _mer indicators indicators
• 0 @ • • 0 • ® ® •
® ©
POWER SPEED
©
TIMER
@
FILTER
RESET
Power0n/0ff
indicator
Filter reset
Fan speedindicators indicators
Low N_id High P_
O • ® • •
® ©
POWER SPEED
Model AFHC21AM Model AFHC09AM
Manual Controls
@
Power On/Off
Button
Pressto turn the air purifier on and off.
Fun Speed Adjustment Button
Pressto adjust the fan motor speed setting.
Model AFHC21AN- Pressto select from levels
! (low)to 4 (high).
Model AFHCO9AN- Pressto select Low,
Hedium or High.
Timer Adjustment Button
(Mode!AFHC21AM Onlg)
Pressto select from timer hour settings i hr.,
2 hr.or 4 hr.The air purifier will run for the
selected number of hours and then turn off.
@
FILTER
RESET
Filter Reset Button
The filter reset indicator light will come
on when the filter needs to be replaced.
To reset the filter indicator after replacing
the filter, if no filter lights are on:
For the Pre-Filter, press the FILTERRESET
button once and the Pre light will flash; then
press and hold for 2 seconds. The indicator
light for the filter will go off.
For the 99.97% True HEPAFilter, press
the FILTERRESET button twice and the
HEPAlight will flash; then press and hold
for 2 seconds. The indicator light for the filter
will go off.
To reset the filter indicator after replacing
the filter, if one or both lights are on:
press and hold the FILTERRESET button
for 2 seconds. One or both indicator lights
will go off.
Remote Control = Model AFHC21AP10nlg
@
Power On/Off Button
Pressto turn the air purifier on and off.
Fun Speed Adjustment Button
Pressto adjust the fan motor speed setting.
Pressto select from levels 1 (low)to 4 (high).
Timer Adjustment Button
Pressto select from timer hour settings
i hr.,2 hr.or 4 hr.The air purifier will run
for the selected number of hours and then
turn off.
Battery - CR2025
Install the batterg that comes with the remote
control. Remove the clip from the end of the remote
control. Install the battery into the clip. Replace
the clip into the remote control.
Power0n/0ff
button --
Fanspeed
adjustmentbutton
_mer adjustment
button
Batteryclip Battery Remote body
! ............. I