Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble Shooting
Problem
Cause
Solution
Blades fail to clip
Lack of oil/Obstructed
Blades fitted or tensioned
incorrectly
Blunt or damaged blades
Unplug clipper & clean the blades. Clear any
obstructions. Oil the blades every 5-10 mins
Unplug clipper. Correctly re-fit the blades. Tension
the blades correctly.
Unplug the clipper & replace the blades. Send blunt
blades for re-sharpening.
Blades hot
Lack of oil
Oil every 5-10 mins.
Excessive blade tension
Tension the blades correctly.
"Cutting air"
Keep blades on the animal between strokes.
Power cuts out
Power source overloaded
Loose connection
Unplug clipper. Clean, oil and correctly tension the
Blades. Replace or reset the fuse where applicable.
Check clipper for obvious damage or clogged filters.
Unplug clipper from power source. Inspect cables
for damage. Use a qualified repairer.
Excessive noise
Lack of oil/Blades tensioned
incorrectly
Blades fitted incorrectly/
Driving socket damaged
Loose clipper head/Lack of
grease on gears
Damaged gear wheel
Worn clipper head bearings
Oil every 5-10 minutes. Tension the blades
correctly.
Unplug clipper and remove the blades. Check for
damage. Replace if necessary. Re-fit correctly.
Unplug clipper. Unscrew clipper head and wipe
the gears clean. Grease the gear, replace the
clipper head and tighten the screws.
Unplug clipper. Unscrew the clipper head. Check
gear for damage. If damaged use a qualified
repairer.
Replace clipper head.
Other
Possible malfunction
Have the clipper checked by a qualified repairer.
Technical Information
* Voltage
e Overload Current
* Rated Wattage
* Speed
« Weight
e Cable length
* Operating Temperature
e Casing material
220-240V or 110-120V a.c. 50/60Hz
80W
0.6A(240V) or 1.2A(110V)
2800 RPM (240V) or 3100 RPM (110V)
0.95kg
5m
0-40°C
PA6 Gf30
This product is in conformity with EN 60335-2-8, and directives 73/23/EEC and 89/336/EEC
Warranty & Disposal
* Items requiring attention under warranty should be returned to your dealer
* Repairs must be carried out by a qualified repairer using genuine Lister parts
* Do not dispose of this product in household waste
* At the end of its useful life please return this product for recycling to:
Lister Shearing Equipment Ltd., Dursley, Gloucestershire, GL11 4HR, England
Publicidad
