Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
• After setting "Auto Channel Scan"using [CH Air]
on the
remote con trol skips unavailable programs automatically.
• If you connect the cable system directly, contact the CATV
installer.
• Ifyoupress[POWER]or[$ETUP]during
auto channel
scan, the setting will be canceled.
• Channel settings will be saved even if the power fails.
• Even if "Autoscan" is completed, the channel setting will be
lost if the AC power cord is unplugged before turning off
the unit by pressing [POWER].
[] Channel
List
Thechannels selected herecanbeskipped whenselecting thechannels
using[CH A/V ].
Those channels c anstill beselected with [the Numberbuttons].
1
Press [SETUP] to display the main menu.
2
Use [Cursor AIr]
to select"CHANNEL",
then press
[ENTER].
or
i..........................
3
Use [Cursor AIr]
to select "Channel
List", then press
[ENTER].
or
Use [Cursor AIr]
to select the channel you want to
skip, then press [ENTER].
or
Y
• The selected channel
darkens in the channel
list,
and it skips when selecting
the channels by using
[CH A/V].
• To re-register the skipping channels, use [Cursor A/V]
and press [ENTER]. The registered channels will be gray
in the channel list, and you can select those channels
by using [CH A/V]
again.
• When you skip a major channel, its minor channels
are skipped
as well.
Note:
I
• The channel with "DTV"indicated on the display is ATSC.
Otherwise the channel is NTSC
5
Press [SETUP] to exit.
EN
Publicidad
