Installation; Install The Batteries - Husky 867006-1004 Guía De Uso Y Mantenimiento

Installation

1

Install the batteries

□
Remove the tray from the back of the Timer by
sliding it out.
□
Insert two AA (1.5V) alkaline batteries
(included) and replace the tray. (Be sure
battery is completely secured)
□
Replace battery every year, when low battery
icon flashes or before long unattended use.
□
If batteries are removed for extended periods
of time, the timer will need to resync with
the cloud via the app to resume the previous
watering schedules and date/time
2
Attach timer to faucet
□
Attach Timer to an outdoor hose faucet and
turn faucet on after programming.
□
Not for use on outlet end of 'Y' connectors or
other hose accessories.
□
Press left and right buttons for manual
operation of the unit on each spigot.
□
Left and right outlets can function at the same
time.
AA AA
6
NOTE: For best practice, use one port at a time.
Water flow will decrease when both sides are used at the
same time.