Publicidad
STEP 1
Place the slide set on the floor of
the cabinet. The front edge of the
slide set strap should be 3/4" back
from the front edge of the cabinet.
Make sure the wood drawer will
pull out without hitting the hinges
(See Figure 1).
STEP 2
Use the (4) provided screws to
fasten the slide set to the floor of
the cabinet (See Figure 2).
#2
STEP 3
Place the wood drawer on the
slides, and push back until the
locks click (See Figure 3).
Caution! If installing unit onto a
shelf, the shelf must be secured to
the cabinet to prevent any tipping
when the unit is pulled out.
2
FIG. 1
FIG. 2
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
Publicidad
