Publicidad
Idiomas disponibles
Idiomas disponibles
Storage
Attach the blade cover to the weeding blade. Store the
tool out of the reach of children. Store the tool in a place
not exposed to moisture or rain.
When storing the attachment separated from the power
unit, put the cap onto the end of the pipe.
► Fig.23
Lubricating moving parts
NOTICE:
Follow the instruction of the frequency
and amount of grease supplied. Otherwise insuffi-
cient lubrication may damage moving parts.
TROUBLESHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-
ment parts for repairs.
State of abnormality
Motor does not start.
Motor stops soon.
Motor speed does not increase.
Weeding blade do not move:
stop the machine immediately!
Abnormal vibration:
stop the machine immediately!
Weeding blade and motor cannot
stop:
Remove the battery immediately!
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita
machine specified in this manual. The use of any
other accessories or attachments might present a risk
of injury to persons. Only use accessory or attach-
ment for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Weeding blade
•
Cultivator blade
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
product package as standard accessories. They may
differ from country to country.
Probable cause (malfunction)
-
-
-
The drive system does not work
correctly.
Weeding blade is broken, bent or worn.
The drive system does not work
correctly.
Electric malfunction.
12 ENGLISH
Drive axle:
Apply grease (Makita grease N No.2 or equivalent)
every 25 hours of operation.
► Fig.24
NOTE: Genuine Makita grease may be purchased
from your local Makita dealer.
Grease lubrication
Interval of lubrication: Every 25 operating hours
1.
Remove the bolt from the hole for lubrication.
► Fig.25: 1. Bolt
2.
Apply the grease (Makita grease SG No.0 or
equivalent) to the tool (approximately 3.0 g as a guide).
3.
Tighten the bolt.
Remedy
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Ask your local authorized service center for repair.
Replace the weeding blade.
Ask your local authorized service center for repair.
Remove the battery and ask your local authorized
service center for repair.
Publicidad
