Beta 019820113 Manual De Uso E Instrucciones página 10

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
USE
Note: The impact wrench can only be operated in combination with the Beta battery,
item 1994BL 12V-2AH.
Bits insertion
Pull spindle guard (8); insert the required accessory and release (8).
Setting direction of rotation
For screwing - clockwise rotation - fully shift button (5) to the operator's left side.
For unscrewing - anticlockwise rotation - shift button (5) to the operator's right side.
Setting the direction of rotation with the tool not running
Start / Stop
To start the impact wrench in the selected mode, press on/off button (2).
The speed of rotation is proportional to the amount of pressure exercised with one's finger on this
button.
When the impact wrench is operated, built-in LED indicator (1) will also turn on.
Releasing the on/off button will cause the cordless impact wrench to stop quickly and LED indicator to
turn off.
To prevent accidental start-up of the impact wrench when not in use, shift button (5) to the middle, in
order to lock on/off button (2).
Note: When the impact wrench is overloaded, thus causing excessive electricity consumption, it will
stop automatically, without any warning. Release the on/off button to leave the tool to cool down.
Note: When the impact wrench is overheated, it will stop automatically. In case of overheating, leave
the tool to cool down.
Connection to battery 1994BL 12V-2AH
Insert the battery into the slot under the handle.
To disconnect the battery, press battery unlocking buttons (3) and disconnect it.
Disconnect the battery after each use and charge it in the battery charger.
Charge the batteries with the Beta 1994CB 12V charger; follow the related instructions.
Charge level
Indicated by LED (4)
- 3 LEDs on: maximum battery charge
- 2 LEDs on: medium battery charge
- 1 LED on: low battery charge
10
EN I