Beta 1986/20V-125BMC Manual De Instrucciones página 14

EN I
INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
Disconnect the battery after each use, and insert it into the battery charger for charging.
MAINTENANCE
Repair and calibration jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- Deliver it to an appropriate collection facility for electronic or electrotechnical equipment
- Return it to the dealer upon purchase of a new equivalent item of equipment
- in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly disposed
of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment or
human health. Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste abd will
give way to the application of such fine sas privided for under current regulations.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month warranty for
professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturin defect by fixing the defective pieces or replacing them at our
discretion.
The tool must be delivered to the Purchasing Centre complete with the relevant documentation (proof of purchase).
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls.
In addition, this warranty will no longer be valid if any changes are made, or if the tool is forced or sent to the customer service
in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential

EU DECLARATION OF CONFORMITY
We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions of the
following Directives and amendments there to:
• Machinery directive 2006/42/CE
• Directive (E.M.C.) 2014/30/CE
• Directive (Ro.H.S.) 2011/65/CE
The Technical Brochure is available at:
BETA UTENSILI S.p.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALY
23/10/2023
14