IKEA BADRING Manual Del Usuario página 7

Battery care
When it's time to replace the battery, a red LED indicator will light up
three times on the sensor and in the IKEA Home smart app you will be
notified when the battery is low.
Changing the battery
Open the back of the sensor, insert a new AAA/HR03 battery and close
it again.
Please note the safety information in this document concerning battery
usage and disposal.
We recommend using 1 x IKEA LADDA 750 (AAA/HR03, 1.2V, 750mAh,
Ni-MH). Sold separately.
Factory reset
Press the pairing button 4 times within 5 seconds.
Care instructions
To clean the product, wipe with a soft cloth moistened with a little mild
detergent. Use another soft dry cloth to wipe it dry.
Never use abrasive cleaners or chemical solvents since this can damage
the product.
Safety instructions
Please read this section carefully before using the product.
It contains important information and should be saved for future
reference.
General safety
- This product is for indoor use only and can be used in temperatures
ranging from 0℃ to 40℃ (32°F to 104°F).
- Do not leave the product in direct sunlight or near a heat source as it
may overheat.
- Different building material and product location can affect wireless
connectivity range.
WARNING!
Risk of explosion if battery is replaced by an incorrect battery type.
Dispose of used batteries according to the instructions.
7