Beta 018330013 Manual De Uso E Instrucciones página 7

OPERATION MANUAL AND INSTRUCTIONS
USE
Before using the torch for the first time, select the operating mode as follows:
- Press ON/OFF switch (1) on the back to turn the torch on/off. The light will be enabled in the Read-out mode.
- Press mode switch (3) once to enable the ECO mode.
- Press switch mode (3) a second time to switch the torch to the Normal mode.
- Press mode switch (3) a third time to switch the torch to the Full Power mode.
- Press switch mode (3) a fourth time to switch the torch back to the Read-out mode.
- Keeping mode switch (3) pressed will cause the torch to enter the Flash mode; pressing it again will cause the torch to go back
to the previous mode.
- When the torch is enabled again by pressing the ON/OFF switch, it will go on in the last selected mode.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
• in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly disposed
of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment and
human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.
WARRANTY
This torch is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month warranty for
professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or replacing them at
our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or
falls.
In addition, this warranty will no longer be valid if any changes are made, or if the torch is forced or sent to the customer service
in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
We hereby declare, assuming responsibility, that the described product complies with the relevant provisions of the following
Directives:
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU;
• Directive 2011/65/EU on the restriction of the use of certain hazardous Substances -Ro.H.S. 2011/65/UE
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALIA
04/05/2023
DECLARATION OF CONFORMITY EU
EN
7