NEC MultiSync FE750+ Manual Del Usuario página 12

Controls
OSM (On-Screen Manager) control buttons on the front of the monitor
function as follows:
EXIT
CONTROL L/M
CONTROL -/+
PROCEED
RESET
NOTE: When RESET is pressed in the main and sub-menu, a
warning window will appear allowing you to cancel the reset
function.
When OSM controls are activated, icons are displayed at the top of the
menu. If an arrow (¡) is displayed in a sub-menu, it indicates further
choices are available. To enter a sub-menu, press PROCEED.
Brightness/Contrast Controls
Brightness: Adjusts the overall image and background screen
brightness.
Contrast: Adjusts the image brightness in relation to the background.
Degauss: Eliminates the build-up of stray magnetic fields which alter the
correct scan of the electron beams and affect the purity of the screen
colours, focus, and convergence. When activated, your screen image will
jump and waver a bit as the screen is demagnetised.
01b_english
Main Menu
Exits the OSM menu.
Moves the highlighted
area up/down to select
one of the controls.
Moves highlighted area
left/right to select one of
the controls.
Has no function.
Resets all the controls
within the highlighted
menu to the factory
setting.
English-4
4
Sub-Menu
Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls.
Moves the bar in the - or +
direction to decrease or
increase the adjustment.
Only executes control or
enters sub-menu.
Resets the highlighted control
to the factory setting.
31.10.2000, 16:56 Uhr