Publicidad
Idiomas disponibles
Idiomas disponibles
Section 4: Operation
How to Use Accessory
Tray
The unit is equipped with an accessory tray with phces to
store your nozzHe extension and shots to hoHdthe cleaning
soHution bottle and the detergent
siphoning fiker.There are
aHsotwo hooks at the ends of the handHe to hoHdyour
spray gun and high pressure hose.
NOTE: The extra holies in the tray are for storing a brush
and a turbo wand.The brush and turbo wand are NOT
included with your pressure washer.You can buy these
items as optional accessories.
I.
Place nozzle extension through hole on accessory tray,
as shown in Figure 14.
2.
Hang your chemical solution bottle on "J" hook and
place detergent siphoning filter in last slot on left
(Figure 14).
3.
Place spray gun on hook attached to accessory tray on
right side of unit (Figure 14).
4.
Hang high pressure hose on hook attached to
accessory tray on left side of unit.
How to Use Spray Tips
The quick-connect
on the nozzle extension allows you to
switch between four different quick connect spray tips.The
spray tips vary the spray pattern as shown (Figure 15).
1
cAuTlo.
" NEVER exchange spray tips without locking the trigger loci<
on the triggen
Low Pressure
Black
Use to apply
chemical
40 ° White
I S ° Yellow
0 ° Red
Follow
these
instructions
to change
spray
tips:
I.
Engage trigger
lock on spray gun.
2.
Pull back collar on quick-connect
and pull current
spray tip off. Store spray tips n slots on holder
that's
attached
to nozzle extension.
3.
Select desired
spray tip:
For gentle
rinse, select white 40 ° spray tip.
To scour
surface, select yellow
15 ° or red 0 ° spray
tip.
To apply chemical, select
black spray tip.
4.
Pull back on collar, insert new spray tip and release
collar.Tug on spray tip to make sure it is securely
in
place.
5.
For most effective cleaning, keep spray tip from 8 to
24 inches away from cleaning surface. If you get spray
tip too close, you may damage
cleaning surface.
6.
DO NOT get closer
than 6 inches when
cleaning tires.
Publicidad
