Black and Decker LDX220 Manual De Instrucciones página 4

z_WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
z_WARNING:
Use of this tool can generate and/or disperse dust, which may cause serious
and permanent respiratory or other injury. Always use NIOSH/OSHAapproved respiratory
protection appropriatefor the dust exposure. Direct particles away from face and body.
• Wear appropriate hearing protection during use. Under some conditions and duration
of use, noise from this product may contribute to hearing loss.
z_WARNING:
ALWAYS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/OPA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NOSH/OSHA respiratory protection.
SYMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as
follows:
V.................. volts
Hz................ hertz
min .............. minutes
- - -. ............ direct current
@ ................ Class I Construction
(grounded)
[] ................ Class II Construction
(double insulated)
_, ............ Readinstructionmanual b eforeuse
G ................ Use proper eye protection
A ................... amperes
W.................. watts
,x, ................ alternating current
no ................. no load speed
(_. ................. earthing terminal
z_ ................ safety alert symbol
.../min or rpm...revolutions or
reciprocation per minute
.................. Use proper respiratory protection
0 .................. Use proper hearing protection
IMPORTANT SAFETYINSTRUCTIONSFORBATTERYCHARGERS
SAVE THESE iNSTRUCTiONS: This manual contains important safety instructions for
battery chargers.
• Before using charger, read all instructions and cautionary markings on charger, battery
pack, and product using battery pack.
z_WARNING:
Shock hazard. Do not allow any liquid to get inside charger.
2_CAUTION:
Burn hazard. To reduce the risk o! injury charge only designated Black
& Decker batteries. Other types of batter es may Durst caus ng personal njury and damage.
z_CAUTION:
Under certain conditions, with the charger plugged in to the power supply,the
charger can be shorted by foreign material. Foreign materials of a conductive nature such as,
but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept
away from charger cavities. Always unplugthe charger from the power supply when there is no
battery pack in the cavity. Unplug chargerbefore attempting to clean.
z_WARNING:
DO NOT attempt to charge the battery pack with any chargers other
than the ones in this manual. The charger and battery pack are specificall_ designed
to work together.
. These chargers are not intended for any uses other than charging designated Black
& Decker rechargeable batteries. Any other uses may result in ri_k ot fire, electric shock or
electrocution.
• Do not expose charger to rain or snow.