Sears Galaxy 721.36078 Manual De Uso Y Cuidado página 15

WARNING
Electric Shock or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electric shock or personal injury
from cleaner suddenly starting.
Frequentlycheck and removehair, string and
lint build-up in the brush area. If build-up
becomes excessive, follow the steps below.
TO REMOVE BELT
Disconnectpower cordfrom electricaloutlet
Using a coin to
turn the latches
and remove
nozzle cover.
Latches
J
Nozzle
Cover
Position hands on the agitator. If the belt
is still attached to the agitator, sever with
scissors and remove it. Carefully lift the
right end of the agitator and the
left end.
j J"
Agitator
Note: It may be necessary to pull on the edge
of bumper to allow the ends of the agitator to
be removed easily.
CLEAN AGITATOR
To clean the agitator, remove string or hair that
may be wrapped around it.
Note: In order to keep cleaning efficiency high
and to prevent damage to your vacuum, clean
the agitator every time you change the belt.
Clean the agitator according to the following
schedule:
Vacuum Use Clean Agitator
HEAVY every week
(used daily)
MODERATE every month
(used 2-3 times/week)
LIGHT every 2 months
(used 1 timetweek)
oO Oy O CAUTION
t disassemble the end cap,
u will damage the agitator.
End Cap
\
\,
-15-