Sears Galaxy 721.36078 Manual De Uso Y Cuidado página 16

TO REPLACE BELT
Make sure that the carpet/bare floor selector is
in the carpet position and the vacuum body is
laid down on the floor.
Loop the new belt on the motor shaft.
.... N ew
j/
Belt _ Belt
Pulley
Note: See PARTS AND FEATURES for belt
number.
Loop the other end of the belt on the belt pulley
on the agitator.
Insert the left agitator end cap, arrow down, into
its slot inthe nozzle base. Pullthe agitatorforward
and insert the right end cap, arrow down, into its
slot in the nozzle agitator base.
Note: Care must be taken due to the belt
tension during reassembly.
Agitator /__ . Nozzle
//_ Base Slot
Bumper End Cap
Press firmly, checking to see that each end is
completely inserted.
Agitatdr
Check to see that the belt is centered on the
belt pulley. Turn the agitator with your fingers to
see that it turns freely.
Replace the nozzle cover and secure the
latches.
Latches
J
Nozzle Cover
-16-