Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
FIRST TIME USE
When the microwave is plugged
in for the first time, the display
will show "1:01". Use the
number pad to enter the current
time and then press the clock
button to confirm
When setting the cook timer, the
microwave will return to standby
mode if there is no input within
30 seconds.
During operation:
• Press the STOP/CLEAR button
to pause the program.
• Press the STOP/CLEAR button
again to cancel the program.
• Press the START/+30SEC
button to begin a program or
to resume a paused program.
The microwave will beep four
times at the end of a cooking
program and "END" will show
on the display. The microwave
will continue to beep every 2
minutes until the STOP/CLEAR
button is pressed or the door is
opened.
SETTING THE CLOCK
The clock can be set as a 12 or
24 hour clock.
1. Press and hold the CLOCK/
TIMER button for 3 seconds
to set the 12 hour clock. Press
this button again to set the 24
hour clock.
2. Use the number pad to set
the current time.
3. Press the CLOCK/TIMER
or Start/+30SEC button to
confirm.
TIMER FUNCTION
1. Press the CLOCK/TIMER
button to set the timer.
2. Use the number pad to
enter the desired time. The
maximum timer that can be
set is 99 minutes and 99
seconds.
3. Press the START/+30SEC
button to begin operation.
The microwave will beep when
the timer is expired. Press the
CLOCK/TIMER button while the
timer is running to see how much
time is remaining. Press the
STOP/CLEAR button to cancel
the timer.
8
Publicidad
