Descargar Imprimir esta página

Husqvarna 330iKP Manual Del Usuario página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Make sure that the power trigger is locked
when the power trigger lockout is in its
initial position.
2. Push the power trigger lockout (A) forward.
Make sure that it moves back to its initial
position when you release it.
3. Make sure that the power trigger and the
power trigger lockout moves freely and that
the return spring works correctly.
4. Start the product. Refer to
product on page 17 .
5. Apply full power.
6. Release the power trigger lockout and
make sure that the cutting attachment
stops fully.
Cutting attachment guard
The cutting attachment guard prevents a
loose object to eject in the direction of the
operator.
2113 - 004 - 03.11.2023
A
To start the
Examine the cutting attachment guard for
damage and replace if it is damaged. Only
use the approved guard for the cutting
attachment.
Safety instructions for the cutting equipment
WARNING:
instructions that follow before you
use the product.
Only use approved guide bar/saw
chain combinations and filing equipment.
Accessories on page 30 for
Refer to
instructions.
Use protective gloves when you use or
do maintenance on the saw chain. A saw
chain that does not move can also cause
injuries.
Keep the cutting teeth correctly sharpened.
Obey the instructions and use the
recommended file gauge. A saw chain
that is damaged or incorrectly sharpened
increases the risk of accidents.
Keep the correct depth gauge setting.
Obey the instructions and use the
recommended depth gauge setting. Too
large depth gauge setting increases the
risk of kickback.
Make sure that the saw chain has the
correct tension. If the saw chain is not
tight against the guide bar, the saw chain
can derail. An incorrect saw chain tension
increases wear on the guide bar, saw
Read the warning
11

Publicidad

loading