Publicidad
Idiomas disponibles
Idiomas disponibles
3, ATTACH MOWER
SIDE SUSPENSION
ARMS
(A) TO CHASSIS
- Position
hole
in arm over pin (B) on outside
of tractor
chassis and secure with retainer
spring.
4.
Repeat on opposite
side of tractor.
7.
Insert end of link (E) into hole in front
mower
bracket
(H) and
secure
with
washer and retainer spring
(J).
1
ATTACH
REAR
LIFT LINKS
(C) - Lift
rear corner of mower
and position
slot
in link assembly
over pin (D) on rear
mower
bracket and secure with washer
and retainer
spring.
8. Hook end of clutch cable spring (Q) into
hole in idler arm (R).
9.
Push clutch cable housing guide (P) into
bracket, slide collar (L) onto guide and
secure with retainer spring
(K).
10. Install belt onto engine pulley (M) and belt
keepers (G).
6,
ATTACH
FRONT
LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly
through
front
hole in tractor
front suspension
bracket
(F).
IMPORTANT:
Check belt for proper routing
in all mower pulley grooves.
11.Raise
attachment
lift lever to highest
position.
12. If necessary,
adjust gauge wheels before
operating
mower as shown in the Opera-
tion section of this manual.
03042rex
22
Publicidad
