Publicidad
Idiomas disponibles
Idiomas disponibles
CAMBER
Camber is the angle between the level through the wheel
center and the lane vertical.
USE
Camber setting tool (1)
E38-E39-E46-E53-E65-E66-E67-E81-E83-E85-E86-E87-E90-E91-E92-E93
1. Loosen the nut (A) of the suspension strut.
2. Place the camber setting tool on the suspension strut dome (E).
3. Pre-tension the camber setting tool with the adjusting nut (D).
4. Loosen the two nuts (B)
5. Remove rivet (C) on suspension strut dome (E), if present.
6. Use the adjusting nut (D) to set the desired camber value.
7. Tighten the two accessible nuts (B) of the suspension strut.
8. Remove tool and tighten last nut (A).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
for BMW models
E60-E61-E63-E64
Camber setting tool (3)
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Camber setting tool (2)
E65-E66-E67-E81-E83-E85-
E87-E90-E91-E92-E93
for BMW models
for BMW models
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
