Publicidad
O x 6
Fig. 4
4. Attach the Center Shelf (Da) to the Upper Left Side Panel (Aa) with two #8 x 1-5/8" Black Screws
(O) through the predrilled holes in the center shelf and into the pilot holes in the bottom edge
of the side panel. Start both screws BEFORE FULLY TIGHTENING. Repeat and attach
Upper Right Side Panel (Ab) and the Upper Vertical Divider (Fa) to the Center Shelf (Da). See
Figure 4.
O x 2
Fig. 5
5. Attach the Top Shelf (Ca) to the Upper Vertical Divider (Fa) with two #8 x 1-5/8" Black Screws (O)
through the predrilled holes in the top shelf and into the pilot holes in the top edge of the vertical
divider. Start both screws BEFORE YOU FULLY TIGHTEN THEM.
Attach the top Shelf (Ca) to the Upper Left Side Panel (Aa) and the Upper Right Side Panel (Ab)
by sliding the Rafix Bolts into the Rafix Cams. Tighten the cams. See Figure 5.
Aa
O
O
O
O
O O
Aa
Fa
Da
O
O
Ca
Ab
Fa
Ab
x4
497Wa — Page 5 — 12/13
Publicidad
