Publicidad
O x 2
Fig. 6
6. Attach the Lower Vertical Divider (Ga) to the Bottom Shelf (Ea) with two #8 x 1-5/8" Black Screws (O)
through the predrilled holes in the bottom shelf and into the pilot holes in the bottom edge of the
lower vertical divider. Start both screws BEFORE YOU FULLY TIGHTEN THEM. See Figure 6.
Fig. 7
Ba
7. Attach the Lower Left Side Panel (Ba) to the Bottom Shelf (Ea) by sliding the Rafix Bolts into the
Rafix Cams. Tighten the cams. See Figure 7. Repeat and attach the Lower Right Side Panel
(Bb) to the bottom shelf.
497Wa — Page 6 — 12/13
Ga
Ea
O
Ea
O
Bb
x4
Publicidad
