Publicidad
Idiomas disponibles
Idiomas disponibles
To record selected tracks of the CD
Before pressing
, program
the tracks (see page 9).
3
&,
...—._
.— ..-,
Preparation
Use Type I (normal)
tapes only.
Set the tape to the point where recording
will start,
7 Insert the tape to be recorded on into deck 1.
Insert the tape with the side to be recorded
on first facing out
from the unit.
2 Press function (CD, TAPE, TUNER or VIDEO/AUX)
and prepare the source to be recorded.
To record from a CD,
press
CD
and load the disc(s).
To record from a tape,
press TAPE, Then insert the original
tape into deck 2 and play it.
To record
from a radio broadcast,
press
TUNER/BAND
and
tune in to a station.
3
To record from a connected source,
press VIDEO/AUX.
Press
to start recording.
-
is depressed
simultaneously,-
When recording
from a connected
source,
start playback
of
the source.
When the selected
function
is CD, playback
and recording
start simultaneously.
To stop
recording,
press WA
on deck 1.
To pause
recording,
press II on deck 1, To resume recording,
press it again.
B
i
"
'w
To start recording precisely (except when recording from
:!! ~!
a CD)
.x, ~.:c
?&:
Before pressing
at step 3 above, press II on deck 1. Then,
,;~"
press
.The deck enters
recording
pause
mode. To restart
recording,
press II again.
R#
,~, :
.~
4
To record part of the CD
a
When
is pressed,
recording
always starts from the first track.
To start in the middle of a track, play the CD first and press II for
"":,
a
CD at the point to start recording from. Then, press
.The pause
$
$
mode for CD is released
automatically
and recording
starts.
,\&?"
,&@$j
##
,
"?%;
About cassette tapes
To prevent accidental erasure,
break off the plastic tabs
on the cassette
tape after recording
with a screwdriver
or
other pointed tool.
Side A
Tab for side A
To record on the tape again, cover the tab openings
with
adhesive
tape, etc.
120-minute
or longer
tapes
are extremely
thin and easily
deformed
or damaged.
They are not recommended.
Take up any slack in
the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
m
Do not press the buttons on deck 2 during recording
Sound adjustment
during recording
To erase a recording
The output volume and tone of the speakers
or headphones
are
1
Insert the tape to be erased into deck 1 and press
TAPE.
freely varied without
affecting
of the recording.
2
Set the tape to the point where the erasure
is to be started.
3
Press
to start the erasure.
ENGLISH
1 I
Publicidad
