Publicidad
Idiomas disponibles
Idiomas disponibles
PLAYING DISCS
Load discs.
CD EDIT/CHECK
A OPEN/CLOSE
Disc
DIRECT pLAY
1-3
p.4b
c
0-9,+1 o
SHIFT
,,1
m242u
,mNDOM/
jIw
w
VII
~
I?EPEAT
DISC CHANGE
LOADING DISCS
Press CD, then press 4 OPEN/CLOSE
to open the
disc compartment.
Load disc(s) with the label side
up.
To
tIlav one or two discs,
place the discs on tray 1 and 2.
To play three
discs,
press DISC CHANGE
to rotate the trays
after placing two discs.
Place the third disc on tray 3.
Close the disc compartment
by pressing
A OPEN/CLOSE,
DISC ChANGE
Tray number of the disc to be played
Total number of tracks
Total playing time
To dav all discs in the disc com~artment,
press
Play begins with the disc on tray 1.
Number
of track
Elapsed
playing
being played
time
To day one disc only, press DISC DIRECT PLAY
The selected
disc is played once.
b.
1-3.
To stop Dlav,
Dress
.
To pause piay,
press II. To resume play, press again,
To search
for a particular point during playback,
keep 4<
or X
pressed
and release
it at the desired
point.
To
skip to the beginning of a track during playback,
press
+
or ~
repeatedly.
To
remove discs,
press A OPEN/CLOSE,
To start play when the power is off (Direct Play Function)
Press
CD.
The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE
is pressed,
the power is also turned on
and the disc compartment
is opened.
To check the remaining time
During play, press CD EDIT/CHECK
while pressing
SHIFT
on
the remote control. The amount of time remaining
until all tracks
finish
playing
is displayed.
To restore
the playing
time display,
repeat the above.
Selecting a track with the remote control
1
Press
DISC DIRECT PLAY 1-3
to select a disc.
2
Press numbered
buttons O-9 and +10 to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and O.
The selected
track starts to play and continues
to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play.
1
Press DISC CHANGE.
2
Remove the discs and replace with other discs.
3
Press ~ OPEN/CLOSE
to close the disc compartment.
m
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
* Do not place more than one compact
disc on one disc tray.
Do not tilt the unit with discs
loaded.
Doing so may cause
malfunctions.
Do not use irregular
shape
CDs
(example:
heart-shaped,
octagonal
ones). It may result in malfunctions.
8
ENGLISH
Publicidad
