Publicidad
NOTE: When the CCS is stopped, the "
the LCD screen and beep will sound twice.
NOTE: If the parking-brake pedal is depressed, the tractor will stop but
the "
" icon will blink on the LCD screen to indicate the CCS is on
standby. In this case, release the parking-brake pedal, press the CCS
button. The tractor will resume driving automatically and the "
icon will stop blinking.
TURNING BLADES ON WHILE DRIVING IN REVERSE
NOTICE: Mowing in reverse is not recommended.
WARNING: Use extreme caution when mowing in reverse. Always
make sure no individuals come into the work area, especially small
children before and while mowing in reverse.
WARNING: The visibility of the operators could be impaired when
operating the tractor attached with the bagger kit. Extreme caution
and familiarity with the surroundings should always be taken into
consideration before and while mowing in reverse.
To Activate (Enter) MOWING IN REVERSE (E23)
To Stop (Exit) MOWING IN REVERSE, you may choose one of the four
ways:
◾
Press the MOWING IN REVERSE button once.
◾
Raise yourself off the tractor seat.
◾
Press the start/stop button for 3s to turn off the LCD screen.
◾
Remove the safety key or remove the battery pack(s) to shut
down the tractor.
NOTE: When the MOWING IN REVERSE is stopped, the "
illuminate on the LCD screen.
MAINTENANCE
WARNING: Always wear eye protection with side shields. Failure
to do so could result in objects being thrown into your eyes resulting in
possible serious injury.
WARNING: Always protect your hands by wearing heavy gloves
or wrapping the cutting edges with rags or other materials when
performing any maintenance on the tractor blade. Always remove the
safety key and battery packs when servicing or transporting the tractor.
RECOMMENDED MAINTENANCE SCHEDULE(S)
" icon will disappear from
Maintenance
Service Interval
"
Before each use or
daily
After each use
Every 25h
Every 100h
" icon will
Every 200h
Every half a year
Before storage
Annually
Maintenance Procedure
◾
Check the safety-interlock system.
◾
Visually check the tires whether they are
inflated.
◾
Inspect the blades.
◾
Inspect the entire product for damaged,
missing, or loose parts such as side
discharge chute, screws, nuts, bolts, caps,
etc., ensuring that all guards are in place
and working properly.
◾
Check and make sure the accelerator
pedal could be depressed and release
properly.
◾
Check the steering wheel damper. The
steering wheel should be rotated with
certain resistance.
◾
Clean the tractor and wash the deck.
◾
Check the tire pressure.
◾
Check the rear wheels, ensuring that all
lug nuts are fastened at the recommended
torque (101 – 103 Nm).
◾
Check the front wheels, ensuring that
the nut is fastened at the recommended
torque (90 – 92 Nm).
◾
Check the front wheels, ensuring that they
turn freely.
◾
Check the parking-brake pedal. Remove
the battery from the tractor, then pull
up the parking-brake lock lever and
depress the parking-brake pedal to set the
parking-brake. Manually push the tractor
forward to see if the tractor can be moved
without the rear wheels rotating. If the
tractor moves and the rear wheels rotate
meanwhile, please contact EGO customer
service center for repair.
◾
Remove the batteries from the tractor.
◾
Remove the safety key from the tractor.
◾
Perform all maintenance procedures listed
above and thoroughly clean the tractor.
◾
Inspect the entire product for damaged,
missing, or loose parts, replace or tighten
the corresponding ones before storage.
◾
Lubricate the shaft sleeves of the front
wheels.
ELECTRIC LAWN TRACTOR — TR4200E
EN
23
Publicidad
