fluidra iQBridge ZB Guia De Instalacion página 11

TROUBLESHOOTING
Issue
The iQBridge ZB loses
the Wi-Fi connection
(slow blinking blue
LED)
I want to stop all my
devices - Emergency
stop
I want to reset
factory defaults
Communication
loss between the
iQBridge ZB and the
slave device
For more information about products and manuals:
www.astralpool.com
www.zodiac-poolcare.com
TRADEMARKS
The Bluetooth® trademark and its logo are registered trademarks.
AppStore is a service trademark of Apple, Inc. registered in the United States and
other countries.
Google Play and Android are trademarks of Google Inc.
All other trademarks and registered trademarks mentioned in this document are
copyrighted and the property of their respective owners.
Solution
• Check the Wi-Fi coverage
• Check that the password for the Wi-Fi
has not changed. If it has, start the
pairing process again.
• Press the button on the box for 10
seconds - the LED turns red.
• Press the button again for 10 seconds
to exit Emergency stop.
Press the button on the gateway for more
than 20 seconds - the LED turns on white.
• Move the slave device closer to the
iQBridge ZB.
• Check the power supply
• Restart the iQBridge ZB
E N
1 1