Tognana IRIDEA D2DPN01IRRO Manual De Usuario página 22

OPERATION
Connect the appliance to a power outlet.
1.
The appliance emits an audible signal and the display will turn on displaying "----" flashing.
2.
Place the food to be cooked in the cooking vessel, and place it on the induction top.
3.
The container must be centred on the hob.
4.
Turn on the appliance by pressing the "
5.
Start induction by pressing the "W/°C" button, the power at 1600 appears on the display by
6.
default. Rotate the knob to choose the desired power (200 to 2000 W).
Press the "W/°C" button again to switch to the temperature indication, set to the maximum
7.
value of 240 °C by default. Turn the knob to choose the desired temperature (60 to 240 °C).
Press the "Timer" button: the display displays 0:00 blinking. Rotate the knob to set the desired
8.
time (max 4 hours).
At the end of the set time the appliance will turn off and the display will display "----" flashing.
9.
If you want to turn off the appliance manually, press and hold the "
10.
IMPORTANT NOTE
appliance, it is recommended not to disconnect it from the power
outlet while the fan is in operation.
parts of the appliance.
KEY LOCK
To lock the keyboard, press and hold the "TIMER" button during use. On display the word "Loc"
appears to indicate the key lock. To unlock press and hold the "TIMER" button again.
SECURITY SYSTEMS
The appliance is switched off automatically if there is no cooking vessel present, or if a cooking
vessel was removed, or if it is not suitable for induction cooking.
In this case the display shows "E0" for 30 seconds, then the product goes into standby and the
display shows "----".
Every time you turn off the product using the "
about 60 seconds, in order to cool the appliance. To turn off the appliance always use the "
button, do not turn it off by simply removing the cooking vessel.
CLEANING AND MAINTENANCE
Before proceeding with the cleaning, always disconnect the plate from the power outlet and let
it cool completely.
1. CLEANING
a. For smaller stains or for daily cleaning, use a moist soft cloth.
b. To remove stubborn dirt, use a mild neutral detergent and a damp cloth. Avoid using metal
scourers or sharp tools.
: In order to prolong the service life of the
ATTENTION – HOT SURFACE!: do not touch the hot
and "on" will be displayed.
" button lightly
" button, the fan will continue to work for
" button
.
22
"