Publicidad
Idiomas disponibles
Idiomas disponibles
c. Clean the glass top and the cooking vessel before use, otherwise the dirt may become
charred and become very difficult to clean.
d. You can clean the dirt from the inlets with a vacuum cleaner or cotton pad. If there is dirt
with oil, add some mild detergent and clean with a toothbrush.
DANGER! DO NOT PUT IN THE DISHWASHER OR
SOAK IN LIQUIDS.
IMPORTANT NOTE
steel wool or abrasive cleaners for cleaning.
2. STORING
Allow the appliance to cool completely before storing it or wrapping the supply cable around it.
Check that there are no food residues on the plate.
Make sure all parts are clean and dry before storing them.
Never store the appliance when it is still wet.
It is recommended to store the appliance in a dry place, clean and away from moisture and
dust.
TROUBLESHOOTING
Problem
After connecting the
power supply and
pressing the "
button,
the appliance
will not turn on.
The induction hob
emits a "beep" sound
Does not work when in
use
Error code E0
Error code E1
Error code E2
Error code E3
Error code E4
Error code E5
Error code E6
EC Error Code
The problem is not
solved.
: Do not use chemical detergents,
Possible cause
Is electricity available?
Is the plug firmly connected?
"
Is the fuse broken?
Incompatible cooking vessels are used or
no container has been placed
The
cooking
vessel
positioned in the centre of the heating zone
Is the base of the cooking vessel larger than
26 cm or smaller than 7 cm?
Is the pot empty or is the temperature too
high?
The air intake or fan is clogged or has
accumulated dirt
The plate is in operation for more than 4
hours without any interruption
No container or unsuitable container
Low voltage
High voltage
Top plate sensor in overheating or short
circuit
Top plate sensor open circuit
overheating IGBT/fan connection problem
top plate sensor/IGBT circuit open or broken
Communication error
is
not
correctly
Solution
Use after restoring electricity
Carefully check the underlying
causes. If the problem cannot be
solved, contact the retailer or
customer support
Replace with containers
compatible with the induction hob
Reposition the container in the
middle of the heating zone
Use containers with a base with a
diameter between 7 and 26 cm
Check if the appliance is being
used improperly.
Remove the material that obstructs
the air intake or fan. Operate the
appliance again after cooling.
Restore cooking modes or use the
timer function
When the error code E0, E3, E5 is
displayed, check if the container is
not suitable or turn the appliance
back on after it has cooled.
When you see error codes E1, E2,
E4, E6, E7, or EC, contact your
reseller or customer support.
Contact your retailer or customer
support.
23
Publicidad
