Descargar Imprimir esta página

neno Chiaro Manual Del Usuario página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
04. FITTING/REMOVING THE SEAT COVER
1. To remove the cover, unhook the toy holderby pressing the clip on the
headband on the inside of the attachment.
2. Unfasten the velcro on the bottom of the recliner and pull the end of the
material from its attachment.
3. Pull the seat cover upwards so that it is removed in its entirety.
4. Put the cover on the seat frame, returning attention so that the attachment
for the toy holder is on the right side of the attachment to the front.
5. Put the velcro end of the cover between the base of the bouncer and the
attachment on the inside. SEE FIG. A.2.
6. Press the velcro end firmly against the other part on the fabric so that the
two velcro strips come together.
05. SEAT BELTS
1. Place your child in the bouncer and position so that the wide centre strap is
between your child's legs.
2. Clip the side straps into the buckles on either side to the centre strap.
3. Make sure the straps are properly fitted to your child and all attachments are
securely clipped in.
4. Adjust the straps by pulling on the end of the belt at the buckle. The straps
should fit snugly but not compressing the child. SEE FIG.B.1
5. Press down on the buckles to undo the straps.
06. CLEANING AND STORAGE
1. Clean the base and seat frame with a damp cloth. Do not use detergents for
cleaning. Then wipe dry so that no water marks are visible.
2. The seat cover and insert can be washed after removal in the washing
machine at a maximum of 30°C, a very gentle process. Do not bleach, tumble
dry, iron or dry-clean. Leave to dry outdoors in the shade. Always check the
quality of the velcro after washing - if the velcro is not working properly, do
not use the product.
3. Wipe toys using a damp cloth with a small amount of mild detergent.
4. Failure to do so may result in discolouration, distortion and damage.
5. Keep the product out of the reach of children.
07. SPECIFICATIONS:
Material: fabric (95% polyester, 5% elastane)
Dimensions: 69.5x45x51.5 cm
Weight: 2.5kg
08. WARRANTY CARD
The product comes with a 24-month warranty. Warranty terms and conditions can
10

Publicidad

loading