neno Chiaro Manual Del Usuario página 9

been fitted correctly.
17. Before positioning the bouncer, make sure that nothing is standing nearby
that could cause a collision.
18. Also make sure that your child does not have access to objects, walls or
other things that they can reach for or push away from. This can cause injury,
suffocation and choking.
19. Do not extend the attached toys in any way, and do not hang toys other than
those included.
20. Do not leave the product in full sunlight or close to heat sources.
21. Do not allow other children or adults to attempt to rock the bouncer, the
bouncer is only meant to rock under the natural movements of the child
lying down.
22. Check regularly the condition of seams, material joints, construction. If
wear is detected, discontinue use immediately and replace the item with
a new one.
02. CONTENTS OF THE KIT
1. Rocking chair base
2. Seat frame
3. Seat cover
4. Inset
5. Toy holder
6. 2 toys
03. FIRST INSTALLATION OF THE PRODUCT
1. Place the base on a flat surface.
2. Insert both ends of the seat frame into the holes in the base. SEE FIG. A.1
3. Put the cover on the seat frame, returning attention so that the attachment
for the holder is on the right side, fastening forward.
4. Put the velcro end of the cover between the base of the bouncer and the
attachment on the inside of the base. SEE FIG. A.2.
5. Press the velcro end firmly against the other part on the cover so that the
two velcro strips come together.
6. Hook the toy holder into the handle on the seat frame.
7. Attach the toys by putting the attachment strap from the toy through the
handles on the toyholder. Once the strap is through, fasten the velcro. Check
that the attachment is correct by pulling on the toys.
8. Insert the centre strap into the holder on the insert, then arrange the insert
on the cover.
9