Brandson Equipment 306537 Manual Del Usuario página 38

6.3 Timer function
The air cooler offers different timer levels that can be adjusted hourly up to a
maximum time of 7 hours.
Switch-on timer
1. Make sure the unit is connected to the mains and is in standby.
2. Press the timer button to select the desired time (one to seven hours).
3. The timer indicator lights up permanently.
4. After the set time has elapsed, the appliance switches on.
Switch-off timer
To do this, press the „Timer" button on the remote control or on the control panel
of the fan. Press it repeatedly to increase the duration of the timer.
Switch off timer function
To switch off the timer function, press the „ON/OFF" key twice or press the timer
key repeatedly until none of the timer control lights are illuminated.
6.4 Cooling mode
Make sure that there is water in the water tank and never remove the water tank
during operation.
Fill the cold packs with water and place them in a freezer compartment. When the
cold packs (3) are sufficiently cold, place them in the water tank to increase the
cooling effect.
The unit runs as a simple fan in normal mode. If you want to switch on the air
cooling additionally, press the "Air cooling ON/OFF key on the remote control or on
the control panel.
As soon as the air cooling is switched on, the control light on the control panel lights
up.
Attention! For maximum effect, we recommend staying within the range of the air
flow.
38
English